Hydrocarbon contamination map

NT

Province and territory drilldown

Hydrocarbon contamination in Northwest Territories

Confirmed release counts, the cleanup backlog still carrying an open file, and how the standards in Northwest Territories decide when a petroleum site is finished.

Sites in the federal inventory

0

Published records with a location

Active obligation

0

Cleanup or monitoring still owed

Closed records

0 (0%)

Regulator has signed the file off

Highest priority sites

0

National classification 1, highest priority for action

The backlog in Northwest Territories

0 sites in Northwest Territories still carry an active federal cleanup obligation, and 0 of them have soil or groundwater recorded as an affected medium. Fuel storage, bulk handling and legacy defence infrastructure account for most petroleum impacted ground in the federal inventory.

Petroleum hydrocarbons, F1 to F4
0
Polycyclic aromatic hydrocarbons
0
BTEX
0
Class 1 and 2, highest priority
0

A site can record more than one contaminant class, so these counts overlap.

Provincial, municipal and private sites are held in provincial registries and are not part of this count. Treat the federal inventory as a floor, not a full picture of Northwest Territories.

Reported releases

Dated incidents reported to the regulator on federally regulated pipelines in Canada, most recent first. Each row shows the incident type exactly as the regulator recorded it. Releases are also labelled by phase: liquid releases can reach soil and groundwater, while gas releases vent to atmosphere and are reported by gas volume.

Jan 16, 2014Norman WellsRelease of SubstanceAtmospheric, gasEnbridge Pipelines (NW) Inc., natural gas - sweet. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Gas releases (665 of them) are reported in cubic metres of gas, vent to atmosphere, and are excluded from the liquid volume above. They are reportable emissions rather than soil or groundwater contamination, so they carry an atmospheric label in the list. Dates are shown exactly as the regulator reported them, in UTC. Federally regulated pipelines only. Provincially regulated pipelines, rail, road and facility spills are reported elsewhere and are not in this file. Source: Canada Energy Regulator, pipeline incident data, Open Government Licence, Canada. Compiled 2026-08-16.

How the standards apply in Northwest Territories

Northern sites are commonly federal obligations managed under the Federal Contaminated Sites Action Plan, with CCME petroleum hydrocarbon standards adjusted for cold climate conditions and remote logistics.

The CCME Canada-Wide Standard for Petroleum Hydrocarbons in Soil is the common backbone. It splits hydrocarbons into four fractions, F1 through F4, and sets numbers by land use, soil texture and depth. Provinces adopt it directly or fold it into their own tables.

The counts on this page come from the federal contaminated sites inventory, which covers sites the Government of Canada is responsible for. Provincial, municipal and private sites are managed under provincial registries and are not counted here.

Closure is decided against published generic criteria first. Where a site cannot meet them, a site specific risk assessment or a management plan with controls carries the file, signed by a qualified professional.

Regulator

Government of the Northwest Territories and federal departments under FCSAP

Programme

CCME standards applied through territorial and federal processes

Medium

Parameter

Threshold

Basis

Soil, residential and parkland, coarse

PHC Fraction 1 (C6 to C10)

210 mg/kg

CCME Canada-Wide Standard for Petroleum Hydrocarbons in Soil, Tier 1

Soil, residential and parkland, coarse

PHC Fraction 2 (>C10 to C16)

150 mg/kg

CCME Canada-Wide Standard for Petroleum Hydrocarbons in Soil, Tier 1

Soil, residential and parkland, coarse

PHC Fraction 3 (>C16 to C34)

1,300 mg/kg

CCME Canada-Wide Standard for Petroleum Hydrocarbons in Soil, Tier 1

Soil, residential and parkland, coarse

PHC Fraction 4 (>C34)

5,600 mg/kg

CCME Canada-Wide Standard for Petroleum Hydrocarbons in Soil, Tier 1

Drinking water

Benzene

5 µg/L

Guidelines for Canadian Drinking Water Quality, maximum acceptable concentration

Public agency records, compiled by Nelson.

These are reference thresholds, not a substitute for the jurisdiction's current tables. Numbers change, and site specific criteria can be set higher or lower once land use, depth and receptors are confirmed. Always work from the agency source linked below.

Sources

Data not supplied by Nelson. Every figure comes from public regulator records published by the agencies cited. Nelson compiles, maps and links the records, and does not create, verify, adjust or own the underlying data. This hub is a free public resource published to share knowledge. Every figure traces to a government dataset a reader can download and re-check, the sources are listed in the methodology, and nothing here is gated behind a form. Dataset compilation copyright 2026 Nelson Environmental Remediation Ltd. All rights reserved. Source attribution required for reuse. Data licence and citation.

Federal Contaminated Sites Action Plan

CCME Canada-Wide Standard for Petroleum Hydrocarbons in Soil

Federal Contaminated Sites Inventory, source of the site counts on this page

Guidelines for Canadian Drinking Water Quality

Download the underlying data

Back to the national map

Nelson has treated hydrocarbon impacted soil for more than thirty years, from gasoline and diesel through heavy fuel oil and refinery sludge. If a site in Northwest Territories needs a treatment path, our team can walk you through the options.

Other province and territory drilldowns

ABAlbertaAlberta Tier 1 and Tier 2 Soil and Groundwater Remediation Guidelines

BCBritish ColumbiaContaminated Sites Regulation under the Environmental Management Act

MBManitobaContaminated Sites Remediation Act and storage tank regulation

NBNew BrunswickAtlantic RBCA, petroleum impacted sites

NLNewfoundland and LabradorAtlantic RBCA, petroleum impacted sites

NSNova ScotiaAtlantic RBCA and Contaminated Sites Regulations

NUNunavutCCME standards applied through territorial and federal processes

ONOntarioOntario Regulation 153/04, records of site condition

PEPrince Edward IslandAtlantic RBCA, petroleum impacted sites

Contact

How can we help?

Project inquiries, technical consultation, or emergencies.

We respond to project inquiries within one business day.

Nelson Environmental Remediation

Head Office

30541 - 100 Avenue

Acheson (Edmonton), Alberta

Canada T7X 6L8

Phone

1.780.960.3660

Toll Free: 1.888.960.8222

Fax

1.780.962.6885

Email

Follow Us on LinkedIn →

More from Nelson

  • PFAS and the changing landscape: What site owners should know
  • LNAPL remediation regulations: How to identify the requirements for your site
  • Alberta Tier 1 soil and groundwater remediation guidelines: How to assess their applicability
  • Mobile thermal technology: configured for the material, brought to site
  • How to use The Hub for contamination research
  • Navigator: a practical guide to remediation strategy
  • The Ground Truth: Warren Nelson's remediation newsletter
  • A new era of enlightenment
  • Value should be the final outcome
  • What’s next at Nelson
  • Why independent research matters more than anything
  • Over thirty years of permanent outcomes: a field review of Nelson’s project record

Site Navigation

  • All Articles & Research
  • Thermal Remediation Capabilities
  • Project Case Studies
  • Remediation Glossary
  • About Nelson Environmental Remediation
  • Contact Nelson