Where Nelson sits on PFAS · Michigan
PFAS Remediation in Michigan
Michigan publishes among the most comprehensive state PFAS frameworks in the US, with EGLE Part 201 cleanup criteria covering seven PFAS compounds in groundwater and drinking water[1], MPART coordination across agencies[2], and an active site list that runs into the thousands. AFFF source areas, industrial PFAS users, and landfill leachate sites drive the state workload. Nelson's PFAS thermal work is at pilot and validation stage, carried out through a NATO-aligned test-bed program. It is not offered as a commercial PFAS treatment service.
Michigan moved earlier than most states, and the practical consequence for site owners is that a PFAS detection now carries a defined regulatory path rather than an open question. Part 201 criteria apply at parts-per-trillion for PFOA and PFOS, well below what most legacy site files were ever characterized against, so properties closed under older standards are being reopened as new sampling rounds reach them. The federal CERCLA hazardous substance designation for PFOA and PFOS[3] adds a liability layer on top of the state framework, and it reaches back to parties who were never named in the original state file.
The sites carrying the most exposure in Michigan cluster into four groups: former and active fire training areas where AFFF was discharged to ground[4], chrome plating and paper coating operations across the western and central industrial corridors, municipal and industrial landfills where leachate carries PFAS to the treatment works, and airports subject to federal foam requirements. For each of these, the deciding question is whether the remedy contains the mass or removes it. Pump and treat, granular activated carbon, and ion exchange all concentrate PFAS into a spent media stream that still has to go somewhere, and that residual keeps the file open. Destruction-based remedies are where the regulatory direction points, and they are the subject of Nelson's pilot program.
PFAS remediation services
Where Nelson sits on PFAS
PFAS molecules are built on carbon-fluorine bonds, the strongest single bond in organic chemistry. Landfilling, soil washing, and stabilization do not break those bonds. They concentrate the problem and move it downstream, a posture regulators in the US, EU, and Canada are now actively closing off.
Nelson's PFAS work is at pilot and validation stage, carried out through a NATO-aligned test-bed program. The RS-series platform, high-temperature desorption with a secondary oxidizer and engineered acid-gas treatment train, is the equipment under evaluation for PFAS matrices. Nelson does not offer PFAS treatment as a commercial service line.
The commercial record on that platform is hydrocarbons and dioxins, built over three decades. PFAS-specific monitoring, stack testing, and confirmation sampling are part of the pilot protocol rather than a delivered service.
Proof: Nelson's hydrocarbon and dioxin destruction track record (Tioga clean-soil return; Bear Hills award-winning program; sustained work on legacy dioxin residues in Vietnam) is the platform anchor. On PFAS, the NATO-aligned pilot is the current status. Pilot findings are discussed under NDA at scoping.
Where Nelson sits on PFAS · Michigan
Scope a PFAS project in Michigan.
Send the matrix, approximate volume, jurisdiction, and target criteria for a pilot or treatability discussion grounded in Nelson's current PFAS validation stage.
PFAS remediation services
1.888.960.8222
Operational reach in Michigan
Michigan mandates are scoped through Nelson's US engagement, with thermal equipment mobilized cross-border as project scope justifies. The RS-series platform is transportable and sets up on site, which means impacted soil is treated where it sits rather than manifested to a landfill in another state. For Michigan owners that matters twice over: it removes the transport and disposal liability tail, and it produces a destruction record tied to the parcel that EGLE reviewers can read against the Part 201 remedial action plan. Typical engagement starts with a volume and contaminant profile review, followed by a treatability assessment and a fixed pricing envelope before any equipment moves.
Frequently asked
What are Michigan's PFAS cleanup criteria?
EGLE Part 201 publishes numerical cleanup criteria for seven PFAS compounds in groundwater used for drinking water, with PFOA, PFOS, and PFNA among the strictest values adopted by any US state[1]. Criteria are expressed in parts per trillion, which is why sites characterized under older standards frequently fail when resampled.
How does Part 201 treat on-site thermal destruction?
On-site high-temperature thermal destruction is a recognized remedy class under EPA technical guidance and is contemplated within Part 201 remedial action plans. For PFAS specifically, Nelson's program is at pilot and validation stage rather than commercial delivery.
How does the federal CERCLA PFAS designation affect a Michigan site?
The designation of PFOA and PFOS as CERCLA hazardous substances[3] creates federal liability that sits alongside the state Part 201 obligation. It also creates reopener risk at properties previously closed under state criteria, and it exposes parties who sent PFAS-bearing material off site for disposal. Source-area destruction is the response that limits both, because it ends the material's onward chain of custody.
What about AFFF source areas at Michigan airports and fire training grounds?
AFFF discharge areas are the highest-concentration PFAS inventory in the state[4]. Concrete pads, drainage swales, and the shallow soil column beneath them typically hold the bulk of the mass in a small footprint, which is favourable for source-area treatment. Removing that mass reduces the loading that drives the downgradient plume and the long-tail pump and treat cost. Nelson's PFAS role at this stage is pilot and treatability work.
Can PFAS in landfill leachate be addressed at the source?
Leachate itself is a water stream and is normally handled by separation technologies such as ion exchange or foam fractionation. What those produce is a concentrated PFAS residual, and that residual is where thermal destruction applies. Treating the concentrate on site avoids shipping a hazardous stream to a third-party facility and avoids the liability that travels with it. That concentrate stream is one of the matrices in Nelson's PFAS pilot work.
How quickly can Nelson respond on a Michigan site?
Mobilization depends on volume, permitting, and site access rather than distance. A typical sequence runs a scoping call within one business day of enquiry and a treatability and volume review inside two weeks. For PFAS scopes that review is the pilot pathway rather than a commercial mobilization.
How does thermal PFAS destruction actually work?
PFAS carbon-fluorine bonds are the strongest single bonds in organic chemistry, which is why the compounds persist and why most treatment technologies capture rather than destroy them. Thermal destruction breaks those bonds by holding the material at high temperature for a controlled residence time, with the fluorine liberated as hydrogen fluoride and captured in the acid gas scrubbing train. The distinction that matters to a Part 201 file is between transfer and destruction. Granular activated carbon and ion exchange move PFAS from water onto a spent medium that still requires disposal, and that medium remains the responsible party's problem. Thermal destruction ends the chain.
Is PFOA remediation different from PFOS or the shorter-chain compounds?
The separation technologies behave differently across the chain lengths, and that is where most remedy failures originate. Granular activated carbon holds long-chain PFOA and PFOS reasonably well but breaks through early on short-chain compounds such as PFBA and PFBS, so a system designed against a PFOA target can pass short-chain mass straight through to the discharge. Ion exchange resins perform better across the range at higher cost. Thermal destruction is largely indifferent to chain length, which is the operational argument for it at sites where the analytical suite shows a broad PFAS signature rather than the two legacy compounds alone.
Which companies perform environmental remediation in Michigan?
The Michigan market divides into three roles that are frequently confused when a site owner starts procurement. Consulting engineers characterize the site and author the Part 201 remedial action plan but do not perform the work. Excavation and civil contractors move and dispose of material, which relocates the liability rather than resolving it. Treatment specialists destroy or permanently treat the contaminant mass. Nelson sits in the third category, supplying transportable high-temperature thermal treatment that operates on the parcel alongside the owner's consultant of record. That commercial record is hydrocarbons and dioxins; PFAS is pilot-stage. Most Michigan projects involve all three roles, and the sequencing question worth asking early is whether the selected remedy ends the material's chain of custody or extends it.
What drives the cost of a Michigan PFAS remediation project?
Volume and concentration matter less than most owners expect, and four other variables matter more. Soil moisture content drives fuel consumption directly, since water is heated before contaminant is. Matrix type determines throughput, with fine-grained clays running slower than granular fills. Site access and utility supply set the mobilization cost. And the regulatory endpoint governs everything, because a criterion set at parts per trillion requires a different confirmation sampling program than one set at parts per billion. Nelson scopes a fixed pricing envelope after a treatability review rather than quoting a unit rate against unknowns. PFAS scopes are handled as pilot work.
Does a closed Michigan site need to be resampled for PFAS?
Frequently yes, and this is the exposure most owners underestimate. Part 201 closures granted before the PFAS criteria were adopted were assessed against an analytical suite that did not include these compounds, so the absence of a PFAS finding in the file reflects the absence of a PFAS test rather than a clean result. Where the historical use profile includes fire training, plating, coating, paper manufacture, or waste receipt, the probability of a detection on resampling is material. The federal CERCLA designation compounds this by creating a liability route that does not depend on the state closure holding.
Discuss your Michigan remediation project
Share the site location, assessments, contaminant profile and approximate soil quantity. Nelson can review the treatment and material-management requirements with your project team.
Toll-free 1.888.320.9714
Qualified enquiry
Tell us about your site in Michigan
Send the contaminant profile, approximate tonnage, and site location. Nelson will respond with the route that fits and the evidence needed to verify it.
Where Nelson sits on PFAS · Other regions
Alberta
British Columbia
Saskatchewan
Manitoba
Northwest Territories
Ontario
Quebec
New Brunswick & Atlantic Canada
Canada
United States
California
New Jersey
Washington State
Vietnam
Asia Pacific
Treatment approach · By contaminant
PFAS (Per- and Polyfluoroalkyl Substances)A family of thousands of synthetic fluorinated organics — including PFOA, PFOS, GenX, PFHxS, and AFFF constituents — defined by C-F bonds that resist conventional treatment and require destruction technologies to close a site.
Regulator sources
[1]Michigan EGLE — Part 201 cleanup criteria including PFAS
[2]Michigan PFAS Action Response Team (MPART)
[3]US EPA — Designation of PFOA and PFOS as CERCLA hazardous substances (2024)
[4]US Department of Defense — AFFF replacement and cleanup program
All Capabilities