Where Nelson sits on PFAS · Alberta
PFAS site planning in Alberta starts with the affected media and exposure pathways. The June 2024 Tier 1 guidelines include PFOS soil values and PFOS and PFOA groundwater values.[1] Those are not interchangeable with Health Canada's drinking-water Objective of 30 ng/L for the sum of 25 PFAS.[2] Confirm the current criteria, land use and project requirements with the qualified environmental professional.
AFFF history at fire-training areas, airports or industrial response facilities can inform the sampling plan; it does not establish contamination without evidence. Nelson's PFAS work is pilot-validated and includes NATO STO test-bed participation. Enquiries are handled as assessment and treatability discussions, not a general commercial PFAS treatment offer.
Review soil results in mg/kg against the applicable soil criteria, and groundwater results in mg/L or ng/L against the relevant groundwater criteria. Tier 1 Table 2 lists PFOS at 0.0006 mg/L (600 ng/L) and PFOA at 0.0002 mg/L (200 ng/L), with an additive ratio test in note 11.[1]
The Health Canada drinking-water Objective is 30 ng/L for a sum of 25 specific PFAS. It is guidance for drinking-water exposure, not a replacement soil criterion or automatic site-closure requirement.[2] Federal land also has custodian-specific assessment and management requirements.[3]
Alberta PFAS regulatory guide and official sources
Alberta Tier 1 and Tier 2 practical guide
Bring together foam-use history, drainage, source-area locations, soil profiles, groundwater flow and possible receptors. Specify the analyte list, representative sample locations, reporting limits and quality controls with an accredited laboratory and qualified assessor.
Consider hydrocarbon co-contamination and separate the evidence for each material stream. A public inventory entry provides context; it does not establish the present extent, concentration or treatment requirement of a site.
Alberta PFAS records in the Hub
Phase II site assessment guide
PFAS removal, concentration and destruction answer different questions. Review treatability for the actual soil, water or residual stream, and establish emissions and residual testing as well as target-compound results where appropriate. A hydrocarbon treatment record cannot establish PFAS destruction.
Excavated material, spent media, water and other residuals need authorized management pathways. Treatment and disposal may both belong in a scope. Agree the analytical methods, operating evidence, applicable authorizations and completion responsibilities before selecting a process.
PFAS remediation methods and verification
Nelson's public NATO STO test-bed record
Discuss assessment or treatability evidence
Where Nelson sits on PFAS · Alberta
Send the matrix, approximate volume, jurisdiction, and target criteria for a pilot or treatability discussion grounded in Nelson's current PFAS validation stage.
Nelson operates from Acheson, west of Edmonton. Its mobile thermal fleet has 30+ years of hydrocarbon remediation experience. For PFAS, send assessments, analytical results, affected media, estimated quantities and access constraints for a pilot-stage treatability discussion. Commercial hydrocarbon experience does not predict PFAS performance.
Share the site location, assessments, contaminant profile and approximate soil quantity. Nelson can review the treatment and material-management requirements with your project team.
Qualified enquiry
Send the contaminant profile, approximate tonnage, and site location. Nelson will respond with the route that fits and the evidence needed to verify it.
Where Nelson sits on PFAS · Other regions
New Brunswick & Atlantic Canada
Treatment approach · By contaminant
[1]Alberta Tier 1 Soil and Groundwater Remediation Guidelines