Built from published government records, not estimates

North America hydrocarbon map: petroleum releases, cleanup backlog, and source water

Every open petroleum release on the federal tank record, mapped and filterable by state, cleanup status, and product. Open any pin to see the record behind it.

Status

Contaminant subgroup

(8,020)

Canada publishes contaminated sites, not tank release events, so this layer is counted separately and never added to the US release totals.

(7,613)

Clusters open into individual records as you zoom in. Every pin links back to its source entry.

2

2

2

2

3

3

4

4

4

5

5

5

5

6

6

6

6

7

8

9

13

13

16

18

18

19

19

21

32

60

61

133

170

209

241

528

646

2

2

4

14

18

29

38

70

173

210

247

350

361

687

753

1.6k

2k

3.1k

4.3k

Leaflet | Tiles © Esri — Esri, HERE, Garmin, © OpenStreetMap contributors

Keyboard: tab to the map, then use the arrow keys to pan and the plus and minus keys to zoom. Every record on the map is also described in the summary and tables below.

What this map shows

The map plots petroleum release and site records across North America. The current view covers all of North America under open cleanup files, showing every petroleum subgroup. 65,894 United States tank release records match, alongside 2,323 Canadian federal petroleum site records. An even sample of 14,000 United States points is drawn so the map stays responsive, and every total here counts the full match.

7,613 of the United States releases sit inside a source water protection area. 1,430 Canadian sites are classified high priority, and 0 are closed records.

Highest United States counts in view

FL10,067

MI8,502

NC5,400

IL5,359

NJ4,663

Highest Canadian counts in view

BC696

ON378

QC370

NL208

AB123

Subgroups in view: Gasoline and BTEX range 12,103. Diesel and fuel range organics 1,431. Heating and fuel oil 142. Waste and used oil 348. Other petroleum 1,338. Other substance 3,000. Substance not reported 47,532. Petroleum hydrocarbons (F1 to F4) 1,656. Polycyclic aromatic hydrocarbons 581. BTEX 86

Map legend

Colour is the contaminant subgroup. A filled dot is a reported release, a ring is a site record.

United States, open tank releases

Gasoline and BTEX range12,103

Diesel and fuel range organics1,431

Heating and fuel oil142

Waste and used oil348

Other petroleum1,338

Other substance3,000

Substance not reported47,532

Subgroup names link to the Nelson definition. The arrow opens the EPA UST Finder record the classification is derived from.

Canada, federal petroleum sites

Petroleum hydrocarbons (F1 to F4)1,656

Polycyclic aromatic hydrocarbons581

BTEX86

Canada publishes contaminated sites, so these are site records rather than release events. They are never added to the US release totals. Subgroups are read from the contaminant of concern field in the Federal Contaminated Sites Inventory.

Size and stroke

Release inside a source water protection area7,613

Site classified high priority, class 1 or 21,430

Open US releases in North America
62,402
Inside a source water protection area
6,618
Closed, no further action
311,153
Counties with a record
1,645
Canadian federal petroleum sites
433
Active federal obligation
0
Highest priority, class 1 and 2
0
Soil or groundwater affected
0

Counts as of August 22, 2026. Compiled from 9 public datasets.

Treatment and recoveryHow Nelson treats hydrocarbon impacted soil and recovers usable product.

United StatesState tank programmes, closure standards, and the open backlog.

CanadaCCME framework plus every province and territory.

Data not supplied by Nelson. Every figure comes from public regulator records published by the agencies cited. Nelson compiles, maps and links the records, and does not create, verify, adjust or own the underlying data. This hub is a free public resource published to share knowledge. Every figure traces to a government dataset a reader can download and re-check, the sources are listed in the methodology, and nothing here is gated behind a form. Dataset compilation copyright 2026 Nelson Environmental Remediation Ltd. All rights reserved. Source attribution required for reuse. Data licence and citation.

Overview

Map

Rankings

Jurisdictions

Treatment

Mobile fleet

Evidence

Methodology

Three kinds of record, three different questions

A release is a confirmed loss of petroleum to soil or groundwater at a specific property. A status is where the regulator has taken that file: still open, or closed with a no further action determination. A source water flag says the release sits inside a delineated protection area for a public supply. Each answers a different question, so each is counted on its own terms.

View one, the default

Confirmed releases to remediate

Petroleum releases confirmed by a state tank programme. These are properties with an owner, a regulator file, and a cleanup obligation on the public record.

View two

Cleanup status and backlog

Open files against closed files. The ratio shows how quickly a jurisdiction is working through its inventory, and where the backlog is stacking up.

View three

Releases near drinking water

Releases whose coordinates fall inside a source water protection area. It shows proximity to public supply, and says nothing about whether water has been affected.

How to search releases by state, status, product, and source water

Start with the jurisdiction, then narrow by status and by the product spilled: gasoline and the BTEX range, diesel and fuel range organics, heating and fuel oil, waste and used oil. Turn on the source water filter to see only releases sitting inside a protection area. Every pin opens the federal record for that release, and every state name in the ranking table opens a jurisdiction brief with the local closure standard.

What this map counts, and what it cannot count yet

The map is built from the federal underground storage tank record, which is the one dataset with consistent national coverage of confirmed petroleum releases. It is a floor, not a total.

Above-ground tank releases, pipeline incidents, refinery and terminal files held in state programmes, upstream oil and gas sites, and privately managed assessments sit outside it. Those records are real, and they live in dozens of separate systems with different reporting thresholds and no shared site identifier, so they are excluded rather than estimated.

Read the totals as confirmed and published, not complete. Absence of a pin means no federal record has been published for that property. It does not mean the property is clean.

States with the largest release inventory

Ranked by open releases.

State

Releases

Open per 100k

brief

9,360

45.4

brief

8,429

84.1

brief

5,962

57.9

brief

5,903

45.3

brief

4,502

49.5

brief

2,618

35.8

brief

2,266

45.0

brief

2,224

5.6

brief

2,029

17.3

brief

1,861

27.6

brief

1,774

13.7

brief

1,722

56.6

Counties carrying the load in North America

The fifteen counties with the most releases under the current status filter.

County

State

Open

Total

Cook

IL

2,023

9,811

Wayne

MI

1,552

4,612

King

WA

1,025

1,063

Miami-Dade

FL

1,025

3,550

Hillsborough

FL

774

2,750

Oakland

MI

689

2,187

Orange

FL

687

2,131

Pinellas

FL

670

1,997

Duval

FL

653

1,967

Bergen

NJ

589

2,002

Essex

NJ

574

1,613

Broward

FL

550

2,235

Los Angeles

CA

524

7,482

Genesee

MI

487

1,093

Mecklenburg

NC

426

1,953

Public agency records, compiled by Nelson.

Canada: federal petroleum sites by province and territory

Canada has no national tank release register, so the comparable public record is the Federal Contaminated Sites Inventory. These are sites where the Government of Canada records petroleum hydrocarbons, PAHs, or BTEX as a contaminant of concern. Provincial, territorial, municipal and private sites sit outside it and are not counted.

Province or territory

Sites

Active

Class 1 and 2

brief

1,789

696

927

brief

1,316

378

649

brief

832

370

410

brief

910

208

357

brief

540

123

159

brief

607

123

204

brief

641

94

180

brief

190

93

117

brief

198

92

135

brief

484

70

112

brief

318

48

52

brief

92

21

55

brief

103

7

28

Compare jurisdictions

Pick up to three states, provinces or territories and read them on the same basis: how much of the record is closed, how old the unresolved files are, and which cohort is still holding.

Florida

Texas

British Columbia

Measure

Florida

Texas

British Columbia

On the record

34,940 releases

27,973 releases

1,691 sites

Still open

10,136

1,239

703

Share closed

71.0%

95.6%

58.4%

Median age of an open file

35 yrs

16 yrs

21 yrs

Median years to closure

not published

not published

3 yrs

Before 2000 cohort closed

69%

98%

92%

2000s cohort closed

82%

92%

60%

2010s cohort closed

59%

73%

48%

2020s cohort closed

not reported

not reported

36%

Jurisdiction brief

Open

Open

Open

US measures come from the federal tank release record, which carries a report date on every release but never a closure date, so closure is read as current status. Canadian measures come from the federal contaminated sites inventory, which publishes an annual return per site including the year it closed. The two countries count different things, releases against sites, so compare the rates in this table rather than the raw totals.

Reported release events, United States

Every oil and chemical release in the United States is supposed to be called in to one federal number. These are those calls, newest first, covering pipelines, tanks and facilities, rail and highway hazmat, vessels, and firefighting foam discharges.

Filter reported material

Events reported
31,125
Petroleum and fuel
21,908
AFFF or PFAS material
106
Reached water
17,717

Aug 16, 2026Golden Meadow, LAVesselReached waterRec Marine Logistics. Vessel, oil, fuel: no. 1-d. Cause reported as other.

Aug 16, 2026ALVesselReached waterParker Towing Company. Vessel, oil: diesel. Cause reported as equipment failure.

Aug 16, 2026LAFixedReached waterPerdido Energy Llc. Fixed, oil: crude. Cause reported as equipment failure.

Aug 16, 2026Cape Coral, FLVesselReached waterVessel, gasoline: automotive (unleaded). Cause reported as vessel sinking.

Aug 16, 2026Golden Oak/Lake Buena Vista, FLFixedReached waterWalt Disney World. Fixed, gasoline: automotive (unleaded). Cause reported as operator error.

Aug 16, 2026CAVesselReached waterVessel, unknown oil. Cause reported as vessel sinking.

Aug 16, 2026LAPipelineReached waterArena Offshore. Pipeline, waste oil. Cause reported as equipment failure.

Aug 16, 2026OHVesselReached waterVessel, oil, misc: motor. Cause reported as vessel sinking.

Aug 16, 2026Foraker, OKPipelineReached waterLegacy Petroleum. Pipeline, oil: crude and 1 other material. Cause reported as equipment failure.

Aug 16, 2026Mentor, OHVesselReached waterVessel, gasoline: automotive (unleaded) and 1 other material. Cause reported as vessel sinking.

Aug 16, 2026Nashville, TNRailroadRailroad, oil, edible: vegetable. Cause reported as other.

Aug 16, 2026Wildwood Crest, NJUnknown SheenReached waterUnknown Sheen, unknown oil. Cause reported as unknown.

Notifications are initial reports made to the federal call centre. They are not verified release volumes and some are later found to be unsubstantiated. Counts read as reported events, not as confirmed sites. Source: National Response Center, United States Coast Guard, US federal government work, public domain. Reported oil and chemical release notifications, calendar years 2025 to 2026. Compiled 2026-08-22.

Reported releases

Dated incidents reported to the regulator on federally regulated pipelines in Canada, most recent first. Each row shows the incident type exactly as the regulator recorded it. Releases are also labelled by phase: liquid releases can reach soil and groundwater, while gas releases vent to atmosphere and are reported by gas volume.

Incidents on the record
2,024
Hydrocarbon releases
758
Liquid volume, soil and water pathway
11,169 m³
Most recent report
Jul 28, 2026

May 24, 2026MacklinRelease of SubstanceAtmospheric, gasNGTL GP Ltd., as general partner on behalf of NGTL Limited Partnership, natural gas - sweet, 1 m³ of gas vented. Status: Initially Submitted. Vented to atmosphere, no soil or groundwater pathway reported.

Apr 23, 2026Gretna MBRelease of SubstanceLiquid releaseEnbridge Pipelines Inc., crude oil - synthetic, 78 m³ released. Status: Initially Submitted.

Apr 13, 2026EmersonRelease of SubstanceAtmospheric, gasSignificantTransCanada PipeLines Limited, natural gas - sweet, 277,726.91 m³ of gas vented. Status: Submitted. Vented to atmosphere, no soil or groundwater pathway reported.

Feb 22, 2026HerbertRelease of SubstanceAtmospheric, gasTransCanada PipeLines Limited, natural gas - sweet, 102.13 m³ of gas vented. Status: Submitted. Vented to atmosphere, no soil or groundwater pathway reported.

Feb 12, 2026North BayRelease of SubstanceAtmospheric, gasSignificantTransCanada PipeLines Limited, natural gas - sweet, 970,200 m³ of gas vented. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Jan 8, 2026ManningRelease of SubstanceAtmospheric, gasNGTL GP Ltd., as general partner on behalf of NGTL Limited Partnership, natural gas - sweet, 25,338 m³ of gas vented. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Dec 24, 2025AgassizRelease of SubstanceAtmospheric, gasSignificantWestcoast Energy Inc., natural gas - sweet, 56,359 m³ of gas vented. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Nov 15, 2025Pink MountainRelease of SubstanceAtmospheric, gasSignificantWestcoast Energy GP Inc. on behalf of Westcoast Energy Limited Partnership, natural gas - sweet, 47,310 m³ of gas vented. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Oct 29, 2025Sherwood Park, AlbertaRelease of SubstanceLiquid releaseEnbridge Pipelines Inc., diesel fuel, 17.9 m³ released. Status: Closed.

Oct 21, 2025Pink MountainRelease of SubstanceAtmospheric, gasWestcoast Energy Inc., natural gas - sweet, 3.68 m³ of gas vented. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Oct 10, 2025Prophet River, BCRelease of SubstanceAtmospheric, gasWestcoast Energy GP Inc. on behalf of Westcoast Energy Limited Partnership, natural gas - sweet, 14,241 m³ of gas vented. Status: Submitted. Vented to atmosphere, no soil or groundwater pathway reported.

Oct 10, 2025Temagami, OntarioRelease of SubstanceAtmospheric, gasSignificantTransCanada PipeLines Limited, natural gas - sweet, 18,410 m³ of gas vented. Status: Closed. Vented to atmosphere, no soil or groundwater pathway reported.

Gas releases (665 of them) are reported in cubic metres of gas, vent to atmosphere, and are excluded from the liquid volume above. They are reportable emissions rather than soil or groundwater contamination, so they carry an atmospheric label in the list. Dates are shown exactly as the regulator reported them, in UTC. Federally regulated pipelines only. Provincially regulated pipelines, rail, road and facility spills are reported elsewhere and are not in this file. Source: Canada Energy Regulator, pipeline incident data, Open Government Licence, Canada. Compiled 2026-08-16.

Hydrocarbons by state and province

Each page carries the confirmed release count, the open cleanup backlog, the counties or custodians holding it, and how the local standard decides when a petroleum site is finished.

United States

ALAlabama

AKAlaska

AZArizona

ARArkansas

CACalifornia

COColorado

CTConnecticut

DEDelaware

DCDistrict of Columbia

FLFlorida

GAGeorgia

HIHawaii

IDIdaho

ILIllinois

INIndiana

IAIowa

KSKansas

KYKentucky

LALouisiana

MEMaine

MDMaryland

MAMassachusetts

MIMichigan

MNMinnesota

MSMississippi

MOMissouri

MTMontana

NENebraska

NVNevada

NHNew Hampshire

NJNew Jersey

NMNew Mexico

NYNew York

NCNorth Carolina

NDNorth Dakota

OHOhio

OKOklahoma

OROregon

PAPennsylvania

RIRhode Island

SCSouth Carolina

SDSouth Dakota

TNTennessee

TXTexas

UTUtah

VTVermont

VAVirginia

WAWashington

WVWest Virginia

WIWisconsin

WYWyoming

Canada

ABAlberta

BCBritish Columbia

MBManitoba

NBNew Brunswick

NLNewfoundland and Labrador

NSNova Scotia

NTNorthwest Territories

NUNunavut

ONOntario

PEPrince Edward Island

QCQuebec

SKSaskatchewan

YTYukon

What are petroleum hydrocarbons?

Petroleum hydrocarbons are the compounds that make up crude oil and the fuels refined from it. In contaminated land work they are usually reported as total petroleum hydrocarbons, split into fractions by carbon chain length, alongside the volatile aromatics benzene, toluene, ethylbenzene, and xylenes, known together as BTEX. Lighter fractions move quickly and reach groundwater. Heavier fractions hold in soil and stay for decades.

Benzene drives most of the risk assessment. The US federal drinking water limit is 5 micrograms per litre, and the CCME framework in Canada sets soil and groundwater guidelines by fraction and land use. Closure is decided jurisdiction by jurisdiction, which is why every state and province brief on this hub states the standard that applies there.

Hydrocarbon treatment overview

Thermal desorption

Beyond the numbers: here is how we treat hydrocarbon remediation and recovery

The map shows where petroleum is still in the ground. Nelson has spent more than thirty years taking it out, from gasoline and diesel through heavy fuel oil, drilling waste, and refinery sludge. Contaminated soil is heated in a controlled thermal train until the hydrocarbons leave the soil matrix, the vapour stream is destroyed in the oxidiser, and the treated soil is tested against the closure standard for that jurisdiction and placed back on site.

Where the material carries recoverable value, the same platform captures it. Heavier fractions can be condensed and recovered as usable product rather than burned off, and treated soil returns to the site as engineered fill instead of leaving as landfill tonnage. That changes the economics of a cleanup: less haulage, less disposal liability travelling with the soil, and a closure file the regulator can sign.

For sites where excavation is not practical, in-situ treatment works the subsurface directly, with high resolution site characterisation defining the plume before anything is injected. The choice between the two is a site decision, made against depth, geology, volume, and the standard that closure will be measured on.

Hydrocarbon treatment capability

Inside the treatment plant

Nelson's mobile hydrocarbon remediation capabilities

The treatment plant travels to the release. Nelson owns and operates one of the largest mobile thermal fleets in the industry, engineered to run in Arctic, prairie, tropical, and equatorial conditions without a seasonal pause.

On-site, not hauled away

Soil is treated where it sits. No long-haul trucking, no landfill tipping, and no chain of custody following the material off the property.

Direct fire thermal desorption

Mobile trains sized for production volumes, with the oxidiser stage destroying the vapour rather than moving it. Treated soil is verified against the local closure threshold.

Product and material recovery

Recoverable hydrocarbon fractions are captured where the stream allows, and treated soil returns to the site as engineered fill.

In-situ for what cannot be dug

Subsurface treatment under buildings, roads, and live operations, with high resolution site characterisation defining the plume first.

Remote and cold weather deployment

Mobilisation to camps, northern sites, and island operations, with treatment chemistry validated across the full operating temperature range.

Closure grade documentation

Sampling, analytical, and process records assembled for the regulator holding the file, in the format that jurisdiction expects.

See the full mobile fleet and capabilities

Hydrocarbon project record

Counts as of August 22, 2026. Source datasets refreshed August 16, 2026 to August 22, 2026.

Cite this dataset

Evidence and confidence

What each number on this page is counting, how certain it is, and where it came from.

Confidence basis: Counted directly from the published regulator record with no modelling.Known uncertainty: Counted straight from the federal record. State submissions run six to eighteen months behind, so recent releases are undercounted rather than overcounted.CitationsUS EPA UST Finder, Office of Underground Storage TanksEPA semi-annual UST programme performance measures

Compiled layer: US EPA UST Finder (Office of Underground Storage Tanks). Compiled by EPA from state programme data, 2018 to 2020 baseline. Licence: US federal government, public domain. Refreshed 2026-08-16.

Data methodology

How this map was built, what it covers, and where it stops

The map is drawn from the US EPA UST Finder service, a public domain federal dataset compiled from state tank programme submissions. Nothing here is modelled or estimated. It is a snapshot of reported occurrence, not a compliance determination.

United States: source and timing

US EPA UST Finder (Office of Underground Storage Tanks). Compiled by EPA from state programme data, 2018 to 2020 baseline Licence: US federal government, public domain. Records refreshed 2026-08-16.

View the EPA UST Finder source data

Coverage and gaps

Reporting lag. State submissions run six to eighteen months behind, so recent releases are undercounted rather than overcounted.

Geocoding. Releases without an address level coordinate are held in the state total and are not plotted or assigned to a county.

Closure is local. Closure standards are set state by state, so a closed file in one state may not meet the threshold in another. Read the jurisdiction brief before comparing.

Product classification. Product is optional in many state submissions, so subgroup counts read as a mix profile rather than an exact census.

Outside the tank record. Above-ground tanks, pipelines, refineries and terminals, and upstream oil and gas sites are held in separate programmes and are not merged here.

Canada. Canada publishes no equivalent national tank release register, so the Canadian layer counts sites, not release events. It is drawn from the Federal Contaminated Sites Inventory, filtered to records where petroleum hydrocarbons, PAHs or BTEX are recorded as a contaminant of concern. Provincial, territorial, municipal and private sites are outside that inventory. Cleanup numbers on the Canadian briefs come from the CCME Canada-Wide Standard and the provincial guidelines cited on each brief.

Download the compiled layers

The same files the map reads, so any figure on this page can be re-checked independently.

State roll-up (JSON)

County roll-up (JSON)

Canada federal petroleum sites (JSON)

Embed this map on your site

Free for newsrooms, agencies, utilities, universities and consultants. Paste the snippet into any page. The widget stays current as the underlying datasets are refreshed, and it carries a hyperlinked source line back to Nelson.

North American hydrocarbon release map

Open petroleum releases across the United States and federal contaminated sites across Canada, with the same subgroup colours as this page.

The snippet includes the source line, so the credit travels with the widget. Preview it at /embed/hydrocarbon-map.

Attribution

Keep the source line intact. It reads “Source: Nelson Environmental Remediation, 2026” and links to this hub. Full terms, including what needs written permission, are on the data licence page.

Hydrocarbon questions

Search the questions below for a contaminant, a dataset, or a jurisdiction. Answers cover how the map should be interpreted and where the records come from.

16 questions. Type to filter by keyword, dataset, or compound.

For regulators: what this map can and cannot do

What can a regulator use this map for?

Orientation and cross-jurisdiction comparison. The map pulls the federal tank record into one filterable view so a regulator can see backlog patterns, compare state or provincial counts, and open the jurisdiction brief that lists the local closure standard. It is a starting point, not a primary record.

What can this map not be used for?

It cannot be used for enforcement, legal determinations, or as a substitute for a regulator's own file system. The counts are compiled from public submissions and carry reporting lag, geocoding gaps, and state-by-state closure differences. Always verify a specific site against the official state or provincial record before taking action.

Why do the counts here differ from my state programme?

State submissions to EPA run six to eighteen months behind, so recent releases are undercounted. Closure standards also differ by state, and some programmes report a closure only at the next reporting cycle. Finally, releases without an address-level geocode are held in the state total and are not plotted or assigned to a county.

What does 'inside a source water protection area' mean?

It means the release coordinate falls inside a delineated source water protection area published by EPA. It shows proximity to a public supply. It does not mean groundwater has been affected, that a violation occurred, or that the release reached the intake.

How should the Canadian layer be interpreted?

Canada has no national tank release register equivalent to the US LUST record. The Canadian layer counts federal sites where petroleum hydrocarbons, PAHs, or BTEX are recorded as a contaminant of concern in the Federal Contaminated Sites Inventory. Provincial, territorial, municipal, and private sites sit outside that inventory and are not counted here.

How current is the data?

The map shows the vintage and generation date of the compiled files in the methodology section. Because the underlying state submissions are periodic, the map is always a snapshot of the published record rather than a live feed.

Data and sources

What data does the Nelson hydrocarbon contamination map show?

It shows confirmed petroleum releases and petroleum contaminated sites across the United States and Canada. The US layer carries roughly 65,000 confirmed underground storage tank releases from the EPA UST Finder service, with about 16,000 plotted at address level. The Canadian layer carries 8,020 federal sites where petroleum hydrocarbons, PAHs, or BTEX are recorded as a contaminant of concern.

Where does the US hydrocarbon release data come from?

From the US EPA Office of Underground Storage Tanks UST Finder service, a public domain federal dataset compiled from state programme submissions. Nelson does not create, model, or estimate any of the records. State counts, county rollups, and source water proximity flags all come from that same federal compilation.

Where does the Canadian hydrocarbon data come from?

From the Government of Canada Federal Contaminated Sites Inventory, published under the Open Government Licence. Canada has no national tank release register equivalent to the US LUST record, so the Canadian layer counts federal sites with petroleum hydrocarbons, PAHs, or BTEX listed as a contaminant of concern. Provincial, territorial, municipal, and private sites sit outside that inventory.

How many open petroleum releases are there in the United States?

The federal tank record carries roughly 65,000 confirmed releases that state programmes have not yet closed. A release stays open until the state regulator issues a no further action determination. The number moves with each state submission cycle, so the map reports the vintage of the files it is reading.

What contaminant subgroups does the hydrocarbon map cover?

Gasoline and the BTEX range, diesel and fuel range organics, heating and fuel oil, waste and used oil, other petroleum products, and releases where the substance was not reported. The Canadian layer groups records as petroleum hydrocarbons F1 to F4, polycyclic aromatic hydrocarbons, and BTEX. Colour carries the same subgroup meaning on both sides of the border.

What is the difference between a petroleum release and a contaminated site?

A release is a single reported loss of product from a storage system, which is what the US tank programme records. A site is a property with recorded contamination, which is what the Canadian inventory records. The map keeps them visually separate, a filled dot for a release and a ring for a site, and never adds the two totals together.

Can I download the hydrocarbon data behind the map?

Yes. The compiled JSON layers the map reads are published on the site, and the federal sources are linked from the methodology section so anyone can diff the extracts against the originals. The hub is a free public resource and the data carries its original public licence.

How current is the hydrocarbon release data?

The map shows the vintage and generation date of the compiled files in the methodology section. State submissions to EPA typically run six to eighteen months behind, so recent releases are undercounted. Treat the map as a snapshot of the published record rather than a live feed.

Why are some releases missing from the map?

Releases without an address level geocode are held in the state total and are not plotted or assigned to a county. Some state programmes also report closures only at the next reporting cycle, and a small share of records carry coordinates that fail validation. Those records still count in the state rollup.

Does Nelson supply or verify the hydrocarbon data?

No. Every record comes from a public government dataset. Nelson compiles, filters, and visualises the published record and links each layer back to its source. Verify any individual site against the official state or provincial file before making a compliance or remediation decision.

Qualified enquiry

Have a hydrocarbon site on this map?

Send the contaminant, approximate tonnage, and jurisdiction. We will come back with the treatment path that fits and what it takes to verify closure.

Contact

How can we help?

Project inquiries, technical consultation, or emergencies.

We respond to project inquiries within one business day.

Nelson Environmental Remediation

Head Office

30541 - 100 Avenue

Acheson (Edmonton), Alberta

Canada T7X 6L8

Phone

1.780.960.3660

Toll Free: 1.888.960.8222

Fax

1.780.962.6885

Email

Follow Us on LinkedIn →

More Nelson contamination data

PFAS contamination mapWater system detections and federal sites listing PFAS.

Military contaminated sites mapFormerly used defense sites and National Defence sites.

All hubs and jurisdictionsIndex of every state and province page across the three maps.

Cite this dataset

Cite this datasetFree to use with credit. Pick a format, copy it, and the link back to the source comes with it.Plain textArticles, reports, slides and social posts. CopyNorth American hydrocarbon contamination map. Nelson Environmental Remediation Ltd., 2026. Counts as of August 22, 2026. https://nelsonremediation.com/hydrocarbon-contamination-mapAPAAcademic papers and formal references. CopyNelson Environmental Remediation Ltd. (2026). North American hydrocarbon contamination map [Data set]. Counts as of August 22, 2026. Retrieved from https://nelsonremediation.com/hydrocarbon-contamination-mapWeb linkDrops straight into a page with the backlink in place. Copy<p>Source: <a href="https://nelsonremediation.com/hydrocarbon-contamination-map" rel="noopener">North American hydrocarbon contamination map</a>, Nelson Environmental Remediation Ltd., 2026. Counts as of August 22, 2026. Compiled from public regulator records, <a href="https://nelsonremediation.com/data-licence" rel="license noopener">licence terms</a>.</p>BibTeXReference managers and research tooling. Copy@misc{nelson2026hydrocarboncontaminationmap, title = {North American hydrocarbon contamination map}, author = {{Nelson Environmental Remediation Ltd.}}, year = {2026}, note = {Data set. Compiled from public regulator records. Counts as of August 22, 2026}, url = {https://nelsonremediation.com/hydrocarbon-contamination-map} }Source attribution required. Reuse, republication, redistribution or model training on this compilation must credit Nelson Environmental Remediation Ltd. and link to nelsonremediation.com. Full licence terms.Close

What can this map not be used for?

It cannot be used for enforcement, legal determinations, or as a substitute for a regulator's own file system. The counts are compiled from public submissions and carry reporting lag, geocoding gaps, and state-by-state closure differences. Always verify a specific site against the official state or provincial record before taking action.

More from Nelson

  • PFAS and the changing landscape: What site owners should know
  • LNAPL remediation regulations: How to identify the requirements for your site
  • Alberta Tier 1 soil and groundwater remediation guidelines: How to assess their applicability
  • Mobile thermal technology: configured for the material, brought to site
  • How to use The Hub for contamination research
  • Navigator: a practical guide to remediation strategy
  • The Ground Truth: Warren Nelson's remediation newsletter
  • A new era of enlightenment
  • Value should be the final outcome
  • What’s next at Nelson
  • Why independent research matters more than anything
  • Over thirty years of permanent outcomes: a field review of Nelson’s project record

Site Navigation

  • All Articles & Research
  • Thermal Remediation Capabilities
  • Project Case Studies
  • Remediation Glossary
  • About Nelson Environmental Remediation
  • Contact Nelson