hydrocarbons · Ontario
Nelson supports contaminated soil treatment and hydrocarbon remediation in Ontario, drawing on 30+ years of hydrocarbon project experience. Petroleum- and diesel-impacted soil, site conditions and applicable cleanup objectives are reviewed together to define the appropriate remediation approach.
This page brings together Ontario regulatory context, mobile thermal treatment planning and the documentation needed to support the project team. Each site requires its own assessment and approvals.
Contaminated soil treatment in Ontario begins with characterization of the affected ground and the intended cleanup objectives. Existing assessments, laboratory results, estimated soil quantities and land-use requirements help establish which material streams need management and which methods are technically suitable.
Nelson offers soil treatment and disposal pathways. Excavation, segregation, mobile thermal treatment, approved offsite disposal and reuse may be parts of the same project. Decisions are made for each soil stream, with receiving conditions, treatment suitability and all required approvals considered together.
Petroleum releases can leave gasoline, diesel, crude oil and weathered hydrocarbon fractions in soil. Site history and analytical results establish which hydrocarbon fractions, BTEX, PAHs and other contaminants need attention. Free product and affected groundwater may need separate measures alongside soil remediation.
For suitable excavated soil, thermal desorption separates organic contaminants from the soil matrix. The configured off-gas train then destroys or recovers the separated organics. Moisture, soil texture, organic loading and cleanup criteria influence feed preparation and equipment selection. Co-contaminants and residual streams must also be assessed.
Petroleum hydrocarbons: contaminants and treatment
Contaminated soil treatment with thermal desorption
Ontario Regulation 153/04 governs Records of Site Condition and related assessment requirements. Where the RSC process applies, a Qualified Person evaluates the site and the applicable standards and prepares the required record. An RSC is not required for every soil-remediation project; confirm the obligations for the property and proposed change of use.[1]
Ontario Regulation 406/19 addresses on-site and excess-soil management, with conditions and exemptions. Soil characterization, eligible destinations and records must be reviewed for the actual project. Meeting a site cleanup criterion does not by itself establish that soil may be moved to any receiving site.[2]
Nelson’s London office supports Southwestern Ontario clients. Mobile thermal equipment deployment is planned from Acheson, Alberta, according to the material, site requirements and practical mobilization conditions. Nelson’s treatment documentation supports the project team and Qualified Person; it does not replace their regulatory responsibilities.
Mobile thermal fleet configurations and design envelopes
Nelson’s Canadian gold-mine project record documents mobile thermal treatment of PCB-contaminated soil in Ontario. It is an example of provincial deployment and project-specific treatment controls, rather than a petroleum-soil performance claim. Review the full project record for its contaminant and regulatory context.
Ontario gold-mine PCB soil treatment project
Agree on sampling, analytical methods, stockpile segregation and reporting requirements before treatment. Confirmation results establish whether the sampled material meets the project criteria. Treatment records, emissions documentation where applicable, and traceable material movements support the final project record.
Any disposal destination must be authorized or eligible to receive the actual material. Treated soil reuse also requires confirmation of the applicable conditions. Regulatory completion is assessed within the governing framework; neither treatment nor receiving receipts alone establish that all site obligations are complete.
Contaminated soil disposal planning checklist
Discuss your remediation project
Distinguish the property’s assessment and Record of Site Condition requirements from excess-soil movement and receiving-site obligations. A passing cleanup result does not authorize every reuse destination.
Compare remediation techniques against the same source boundary, cleanup objectives and verification requirements. Excavated-soil thermal desorption, in-situ programs, excavation and authorized disposal have different access and residual-management needs. Metals cannot be destroyed by heating; mixed contamination and PFAS require separate assessments.
Mobile thermal soil remediation services
Compare remediation techniques and technologies
Methods Nelson provides and assessment fit
Soil remediation services and project brief
Ontario PFAS assessment and treatability
hydrocarbons · Ontario
Send the matrix, approximate volume, location, and cleanup criteria. Nelson will identify the treatment route, evidence requirements, and practical next step.
Provide the site location, environmental assessments, laboratory results, approximate soil quantity, intended land use and access constraints. These inputs support a site-specific review of treatment configuration, disposal requirements and verification responsibilities.
Share the site location, assessments, contaminant profile and approximate soil quantity. Nelson can review the treatment and material-management requirements with your project team.
Qualified enquiry
Send the contaminant profile, approximate tonnage, and site location. Nelson will respond with the route that fits and the evidence needed to verify it.
hydrocarbons · Other regions
New Brunswick & Atlantic Canada
Treatment approach · By contaminant
[1]Ontario Regulation 153/04 (Records of Site Condition)
[2]Ontario Regulation 406/19: On-Site and Excess Soil Management
Environmental remediation services in Canada and the United States
Hydrocarbon remediation services: 30+ years of treatment experience