Product · 2026
PFAS, petroleum hydrocarbons, and military contaminated sites on one map, with a dossier for every state and province and a widget you can carry onto your own site.
By
, Chief Marketing Officer
August 22, 2026
TL;DR
The Hub is one map for PFAS, petroleum hydrocarbon, and military contamination across the United States and Canada, built from published government records.
It drills from a national heat view down to a single pin, and every one of the 63 tracked jurisdictions has a dossier with counts, status, and the standards that apply.
Any map or dataset can be embedded on your own site with attribution, so the data travels beyond our pages.
The Hub is one window into contamination across North America. It holds the essential public data on three contaminant families side by side: PFAS, petroleum hydrocarbons, and military and munitions sites. Same canvas, same controls, same rules for what a pin means.
It also tracks what is happening now. Alongside the legacy inventories, The Hub carries a current events layer built from two federal reporting streams: every oil and chemical release called in to the United States National Response Center, and every incident on a federally regulated pipeline reported to the Canada Energy Regulator. That covers pipeline ruptures, tank and facility releases, rail and highway hazmat spills, vessel discharges, fires and explosions, and AFFF firefighting foam discharges that carry PFAS. Roughly 20,000 reported events in a rolling twelve months, each one dated, located, and tied to the material involved. Historical record and current pressure, read from one place.
63
Every state, province, and territory with a published record in the datasets we compile carries its own dossier page.
The data already exists. That was never the problem. The problem is that it sits in dozens of separate places, in incompatible formats, on different refresh cycles, behind different definitions of the same word. A drinking water result in one federal system, a property record in another, a provincial release register in a third, a defence inventory in a fourth. Anyone trying to understand a region has to reconcile all of it by hand, and most people give up before they finish.
No one had built the central hub. So we did. The goal was a research surface that is easy to use, honest about its sources, and durable enough to stay accurate without a person babysitting it. The datasets rebuild on a published schedule, the provenance travels with every layer, and the refresh dates are visible on the page rather than buried in a footnote.
Fragmented data is the same as no data. If a decision maker cannot see the whole picture in one sitting, the picture does not inform the decision.
Reliable data becomes useful when it can be read quickly and shared without argument. The Hub is built around that. You start at the continental view, narrow to a jurisdiction, and open a dossier that lays out open and closed files, what the regulator requires, and where the numbers came from.
Drill down by map, by jurisdiction, or by search, and land in the same record either way.
See open and closed obligations separately, so a cleaned site is never counted as an active one.
Read the standard that actually applies in that jurisdiction, quoted with its source.
Compare jurisdictions directly: who has enforceable PFAS limits today, who has guidance only, and who has neither.
Share any view as a link, because filters live in the URL.
That comparison layer matters more than it sounds. Policy across North America is uneven. Some jurisdictions have moved early and hard on PFAS, with enforceable limits and funded programmes. Others still publish guidance values with no compliance date attached. Put them next to each other on one screen and the gap stops being an opinion.
Information is power, and in remediation it is also leverage. Communities asking why a plume was never disclosed, regulators setting a compliance calendar, procurement teams scoping a cleanup, journalists checking a claim: all of them need the same underlying record, and all of them currently spend days assembling it.
We have brought the most reliable published data available into one place and one format, so understanding comes faster and action follows sooner. Accountability and progress, mapped from a single surface, visualised and categorised so an insight takes minutes rather than weeks. The contamination problems of the last century are still on the ground, and new ones arrive every quarter. Seeing them clearly is the first step to solving them permanently.
The Hub is designed to be read at four depths. Each one answers a different question, and each map below is the live widget rather than a screenshot, so what you see here is what the product does today.
Start wide. At continental zoom the maps render as density rather than as individual pins, so clusters read as shape instead of as a wall of markers. This is the view for the first question anyone asks: where is the weight of the problem.
Every layer states what one pin means before it shows you any pins. On the PFAS map, drinking water mode counts public water systems in ng/L against the 2024 federal limits. Properties mode counts places where a government body carries a cleanup obligation. Measured mode counts monitoring stations. Three honest answers, never merged into one false total.
Zoom in and the density resolves into individual records. Open one and you get the site name, the operator or responsible programme, the affected media, the phase the file sits in, and the identifier the agency uses, so you can take the record back to the source and verify it yourself.
Behind every jurisdiction sits a dossier. It carries the counts, the status split, the agency that runs the programme, the numeric thresholds that apply, and links to the official tables. Three examples, with the figures the pages carry today.
PFAS dossier
One of the densest drinking water pictures in the country. Read the systems count first, then how many sit above a 2024 federal limit, then the highest single result.
PFAS dossier
A state with an early standard of its own. Fewer systems above the federal limits, because the programme started sampling and acting before the rule landed.
PFAS dossier
Canada reports properties, not taps. The dossier counts federal sites listing PFAS, how many carry a priority classification, and how many remain active.
Sixty-three states, provinces, and territories, each with its own page per contaminant family where a public record exists. Where a cell reads "Not tracked", no published dataset covers that jurisdiction for that contaminant yet, which is itself worth knowing.
United States (53)
Jurisdiction
PFAS
Hydrocarbons
Military
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Connecticut
Delaware
District of Columbia
Florida
Georgia
Hawaii
Idaho
Illinois
Indiana
Iowa
Kansas
Kentucky
Louisiana
Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota
Ohio
Oklahoma
Oregon
Pennsylvania
Puerto Rico
Not tracked
Not tracked
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
US Virgin Islands
Not tracked
Not tracked
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming
Canada (13)
Jurisdiction
PFAS
Hydrocarbons
Military
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland and Labrador
Northwest Territories
Nova Scotia
Nunavut
Ontario
Prince Edward Island
Québec
Saskatchewan
Yukon
Data that cannot leave the page it lives on has a short reach. Every hub ships as an embeddable widget. Copy the snippet, drop it into your own site, and the map arrives with its filters, its behaviour, and a visible source line that credits the compilation and links back. Deep links let you carry a single state, a single filter set, or a single site record rather than the whole continent.
Drinking water results, contaminated properties, and monitoring stations across North America.
The snippet includes the source line, so the credit travels with the widget. Preview it at /embed/pfas-map.
Open petroleum releases and federal contaminated sites. Add ?j=MI to embed a single jurisdiction.
The snippet includes the source line, so the credit travels with the widget. Preview it at /embed/hydrocarbon-map.
Formerly used defense sites and National Defence sites, with status filters and single-site deep links.
The snippet includes the source line, so the credit travels with the widget. Preview it at /embed/military-map.
Reuse is permitted with attribution under the terms at /data-licence. Release history, refresh dates, and source documentation live at /data.
An empty area on the map is not a clean area. It means no public record has been published there in the datasets we compile. Large parts of North America have never been sampled for PFAS at all, and absence of a pin is never evidence of absence of contamination. Pin size and colour describe category and status, never severity. Where a jurisdiction publishes nothing, we say so rather than filling the gap with an estimate.
HOW WE KNOW THIS
Every layer is compiled from published government records: EPA UCMR 5, EPA Superfund and LUST records, the US Department of Defense installation list, Formerly Used Defense Sites property records, the Water Quality Portal, the Canadian Federal Contaminated Sites Inventory, provincial release registers, and Canada Energy Regulator incident reporting.
Datasets rebuild on a published schedule and each carries its source, licence, and generation date. Where a regulator revises a record, the next build carries the revision. Corrections are welcome and are actioned against the source rather than the map.
Related Reading
How to use The Hub for contamination research
Navigator: a practical guide to remediation strategy
IndexEvery contamination map hub and jurisdiction page
Reference registry80 federally confirmed PFAS sites in Canada, and why that is the floor
Industry perspectivePFAS at North American military bases: what the cleanup actually requires
FAQ
What is The Hub?
Where does the data come from?
Does The Hub track new spills and current events?
Can I use the maps and the data on my own site?
Does an empty area on the map mean the ground is clean?No. A missing pin means no public record has been published for that location in the datasets The Hub compiles. Large parts of North America have never been assessed for PFAS at all. The map is a picture of what has been reported, not a picture of what exists.
Remediation tools
How to use The Hub for contamination researchWhat is The Hub used for?
Navigator: a practical guide to remediation strategyWhat is Remediation Strategy Navigator?
Related libraries: Choosing a remediation method, Thermal treatment of contaminated soil.
Read Next
Global•2025NATO Selects Nelson for Permanent Global Solution to PFAS Contamination
Global•2025Nelson Tapped to Solve Massive Remediation Project in Vietnam
Recognition•2025Nelson Named Remediation Company of the Year, 2025
The Hub / Petroleum hydrocarbons
Public petroleum hydrocarbon records by jurisdiction, with the cleanup standard each regulator applies.
Plus 14,737 release events reported across the United States and Canada in the last 12 months, spills, pipeline and rail incidents, fires and AFFF discharges, updated to 2026-08-16.
Stay Informed
Project milestones, regulatory developments, and technical briefs. One email at a time. No noise.
The Hub is Nelson Environmental Remediation's public map of contamination data across the United States and Canada. It brings three contaminant families onto one canvas: PFAS, petroleum hydrocarbons, and military and munitions sites. Each layer is built from published government records, and each of the 63 tracked states, provinces, and territories has its own dossier page with counts, status, and the standards the regulator applies.
Public agency records only. The main sources are EPA UCMR 5 drinking water results, EPA Superfund and LUST records, the US Department of Defense installation list, the Formerly Used Defense Sites property records, the Water Quality Portal, the Canadian Federal Contaminated Sites Inventory, provincial release registers, and Canada Energy Regulator incident reporting. Every layer carries its source, licence, and refresh date on the /data pages.
Yes. Alongside the legacy inventories, The Hub carries a current events layer of dated release incidents, including pipeline ruptures and reported spills, drawn from regulator incident reporting. Those records are dated at publication rather than presented as live wire reporting, so a reader always knows how current the number is.
Yes. Each hub has a copy-and-paste embed widget that carries the map, the current filters, and a visible source line back to nelsonremediation.com. Reuse is permitted with attribution under the terms published at /data-licence. Deep links let you embed a single state, a single filter set, or a single site record.